Publicité
Les langues disponibles
Les langues disponibles
Supporting Signals
PRESET MODE (HDMI)
Resolution
1
640x480
2
720x480
3
720x576p
4
800x600
5
1280x720p
6
1920x1080i
7
1920x1080p
4
V.Freq.(Hz)
H.Freq.(KHz)
59.94
31.469
59.94
31.469
50
31.25
60
37.9
60
45
60
33.75
60
67.5
TV Installation Manual
Installation instructions
PLEASE NOTE: installation of your TV should be carried out by a technical competent person
and confirm to all relevant regulations. lf in any doubt please contact us or a qualified electrician.
Your warranty will be void if any problems are due to incorrect installation/ poor sealing of the unit.
1. Ensure that you get the correct viewing position when installing your mounting plate. Once you
have got the correct position check that there are no hazards around the area of installation, for
example, cables or pipes.
2. Please use our Mounting plate TV sizes (TV Size detailed on page 6-7) below to cut out a
recess in the wall and the size of the hole should not exceed the size of the TV.
3. Unscrew the plate at the back of the TV and connect all required wire connection from the wall,
through the square cable hole to the TV, then screw back the plate securely ensure all the
connected wires are going through the square cabling hole are not pinched or broken .
4. Fix your mounting plate into place with the screws provided.
5. Once you have checked that the TV is functioning correctly and all cables are fitted, apply
unbro-ken bead of silicon to the inside of the TV bezel at least 5mm thick.
6. Please ensure the bezel is firmly sealed to the wall surface to complete the waterproof
properties of the installation. lf it is not sealed correctly this will void your warranty.
1. Make a hole in the wall, and the size of the hole
should not exceed the size of the Television
(Please refer to pages 6-7 for TV size details)
(Please leave enough space for the cables)
2. Position the mounting plate
3. Fit the waterproof television
Screw hole
Cable hole
5
Publicité
