Publicité
Les langues disponibles
Les langues disponibles
✓ When "P1" is displayed, please empty the water tank as soon as possible. Thanks to the wheels,
you can move the air conditioner where the water can be directly and easily
drained (example: toilets, sewers, etc.). If not, place a recovery tank under
the water outlet.
✓ To do this, you must unscrew the nut on the back of the unit and remove
the cap, the water will drain naturally. To facilitate drainage, you can tilt
your air conditioner very slightly to the rear.Une fois le flux d'eau estompé,
vous pouvez à nouveau fixer le bouchon puis l'écrou.
✓ The symbol "P1" must disappear, if the symbol is still present, contact the
help desk.
CAUTION :
When you want to move your air conditioner and the water tank is full, make sure to move it
horizontally and perfectly stable to avoid any risk of water spillage or leakage (inside the unit
but also outside).
6. MAINTENANCE
Notice: in order to avoid electric shock, please turn off the A/C and unplug before
maintenance or repair.
Do not use any tools other than those recommended by the manufacturing.
CLEANING
Unplug before cleaning.
⚫
Wipe with soft semi-dry cloth. Don't use chemical reagent, such as benzene, alcohol and
⚫
gasoline etc; otherwise surface of the A/C and even the whole A/C will be damaged.
Prevent water from spattering in the A/C.
⚫
FILTER SCREEN
Wash the filter screen once every two weeks. If it is blocked by dust, efficiency of the
⚫
A/C will be reduced.
Take out the air inlet grille and pull out the filter screen at both sides according to the
⚫
53
Publicité
