Volpi KV390 Mode D'emploi page 38

A. Turn counterclockwise as shown in the
picture, remove the M5 screw.
C. Remove the M5 screw by turning
counterclockwise as shown in the picture, also
remove the rubber cover.
E. Turn counterclockwise as shown in the
picture, remove the M3 screws from the blade
cover.
38
A
B. Remove the nut clockwise as shown in the
picture, and remove the washer and plain roller
bearing.
C
D. Turn clockwise to remove the hexagon socket
screw.
E
According to the direction shown in the
F.
picture, remove the blade cover and take the
blade.
B
D
F