Volpi KV390 Mode D'emploi page 35

•
Do not move the tool during the pruning shear cutting, it can cause danger.
•
Do not use the device in rain or humidity environment.
•
If the pruners stop working during long term use and you hear 8 fast beeps, this is an indication of
undervoltage protection which means the battery is depleted. Please charge as soon as possible.
•
Switch off the device after use and remove the battery from the pruner.
•
If no operation for 10 minutes, the pruner switches off automatically.
Caution: please check battery charge level or blade sharpening when cutting is difficult
or not smooth.
14.1. Cutting control mode
PROGRESSIVE CUT MODE
The machine only works in progressive cutting mode, this means that the blade moves according to the
depth of the trigger actuation, that is, the blade moves progressively proportional to the trigger
movement.
14.2. Opening change
The KV390 pruner is equipped with a blade opening change system with memory.
It means that it is possible to adjust the opening of the blade according to the desired cutting
diameter.
The opening of the blades can be adjusted in two positions:
- 100% blades opening (default start opening).
- Approx 50% blades opening
Procedure to adjust the opening of the blade:
• Press the power button. After the sound signal, press the trigger twice in rapid
sequence to open the blades - 100% blades opening.
35