Empty Drip Tray - Jennair JJB6424HM Guide D'utilisation

8. Display will show RINSING PLEASE WAIT and hot water will
empty from the spouts.
9. When the fresh water has run out, empty the container used
to collect the fresh water from the spouts.
10. INSERT FILTER INTO ITS HOUSING will be displayed.
Press and remove the water tank. Reinsert the water
NEXT
filter if it had been removed previously.
NOTE: Water filter not available on this model.
11. RINSE AND FILL WATER TANK UP TO MAX LEVEL will
display. Fill tank up to MAX level with fresh water. Next,
INSERT WATER TANK will be displayed. Place the water tank
back into the coffee system.
12. PLACE 2.5 L (3 qt) CONTAINER UNDER OUTLET PRESS
OK TO START RINSING: Place the empty container used to
collect the descaling solution under the spouts and
press OK . Hot water is dispensed and RINSING PLEASE
WAIT is displayed.
13. EMPTY DRIP TRAY: At the end of the rinsing cycle, remove,
empty and replace the drip tray, along with the grounds
container. Replace and press
14. For a few seconds, DESCALE COMPLETE PRESS OK will be
displayed, then the coffee system will turn off. The descaling
process is complete.
NOTE: If you would like to postpone the descaling process until
a later time, press . On the display the
ESC
remain as a reminder.
To access the descaling menu when ready:
1. Press to enter the menu.
2. Press or until the display shows
to start the descaling cycle. Follow the instructions on the
display until cycle is complete.
Auto-Start
The auto-start time can be set to have the coffee maker ready at
a certain time.
NOTE: To enable this function, the time must be set correctly. To
set the time, see "Setting the Clock."
1. Press to enter the menu.
2. Press
or until the display shows
Select the function by pressing
will be displayed.
3. Press or corresponding to the hours and minutes until the
required auto-start time is displayed. Press
to enable or disable auto-start.
4. To confirm, press
OK
page, press twice.
ESC
The auto-start is now set and the symbol will be displayed
next to the time to indicate that the function has been
enabled.
NOTE: When the coffee system is turned off using the main
switch, the auto-start setting will be lost if it had been enabled.
Set Language
1. Press to enter the menu.
2. Press or until the display shows
3. Press Hola
. Press or
Bonjour
Ciao
required language is shown and select it. Press
to return to the home page.
.
NEXT
symbol will
DESCALE. Press
AUTO-START .
. The time setting panel
. To cancel and return to the home
Hola SET LANGUAGE.
Bonjour
Ciao
until the flag corresponding to the
ESC
Set Time
1. Press
2. Press or
3. Press
4. Press or
current time is displayed. To confirm, press
press
ESC
Cup Lighting
1. Press
2. Press or
3. Press
Press
ESC
Drink Settings
In this section, you can consult your customized settings and
reset the default values for each beverage.
1. Press
SETTINGS appears on the display.
2. The reference user profile is highlighted on the display. The
values are shown on the vertical bars. The manufacturer
default value is indicated by the symbol
set value is highlighted by the filled part of the vertical bar.
3. To go back to the settings menu, press
display the beverages, press
manufacturer values for the beverage shown on the display,
press
confirm, press
4. RETURN TO FACTORY will display. Press
The beverage has been reset to the default values. Continue
with the other beverage, or go back to the settings menu.
NOTE: To change the beverages for another profile, go back
to the homepage, select the required profile and repeat the
procedure.
To reset all the beverages in the profile to the default values, see
the "Default Values" section.
Energy Saving
Use this function to enable or disable energy saving mode. When
enabled, the function guarantees reduced energy consumption.
or
When it is disabled, warming time is reduced.
1. Press
SAVING appears on the display.
2. Press
Press
ESC
Demo Mode
By using this setting, the main functions of the coffee system are
shown on the display.
1. Press
shows
2. To exit DEMO MODE, first turn the coffee system off by
pressing the
twice
homepage.
to enter the menu.
until the display shows
. The time setting panel will appear.
corresponding to the hours and minutes until the
, then press again to return to the home page.
to enter the menu.
until the display shows
to enable or disable
to return to the home page.
to enter the menu. Press
NEXT
RESET. CONFIRM RESET will be displayed. To
OK . To cancel, press
to enter the menu. Press
to enable or disable
to go back to the homepage.
to enter the menu. Press
DEMO MODE. Press to start the demo.
. Press the again to go back to the
SET TIME.
OK . To cancel,
CUP LIGHTING.
the lights.
or until DRINK
while the current
. To scroll and
ESC
. To return to the default
.
ESC
OK .
or until ENERGY
energy saving.
or until the display
9