Jennair JJB6424HM Guide D'utilisation page 21

DISPLAYED MESSAGE
TURN THE MILK FROTH
ADJUSTMENT KNOB TO
START CLEANING
ESC
TURN THE MILK FROTH
ADJUSTMENT KNOB TO
MILK POSITION
POSSIBLE CAUSE
Milk has been delivered recently and the tube
inside the milk container must be cleaned.
The milk container has been inserted with the
froth adjustment dial in the CLEAN position.
Reminder that the appliance needs descaling
and/or the filter must be replaced.
NOTE: Water filter not available on this model.
Reminder that the tubes inside the milk
container must be cleaned.
Reminder that the machine must be descaled.
Indicated that the auto-start function is enabled.
Energy saving is enabled.
REMEDY
Turn the froth adjustment dial to CLEAN.
Turn the dial to the required froth position.
The descaling procedure described in the "Descaling"
section needs to be performed as soon as possible.
Turn the froth adjustment dial to CLEAN.
The descaling procedure as described in the
"Descaling" section needs to be carried out as soon
as possible.
To disable the function, proceed as described in the
"Auto-Start" section.
To disable energy saving proceed as described in the
"Energy Saving" section.
21