HQ Power HQLP10015 Mode D'emploi page 12

Maintenance

All screws should be tightened and free of corrosion.

The housing, the lenses, the mounting supports and the installation location (e.g.
ceiling, suspension, trussing) should not be deformed, modified or tampered with;
e.g. do not drill extra holes in mounting supports, do not change the location of the
connections...

Mechanically moving parts must not show any signs of wear and tear.

The electric power supply cables must not show any damage. Have a qualified
technician maintain the device.

There are no user-serviceable parts, apart from the fuse and the lamp.

Refer to an authorized dealer for service and/or spare parts.
Fuse Replacement
1. Unplug the device's power cord from the outlet.
2. Let the device cool down.
3. Open the fuse holder.
4. Replace with an identical fuse.
5. Insert the fuse holder back in its place, replace the rear cover and reconnect
power.
8. Technical Specifications
power supply ........................................................................ 100-240 V~, 50/60 Hz
power consumption ........................................................................................ 35 W
colour ........................................................................................................... black
light source
PAR: 7 x 6 W RGBWAUV 6-in-1
SMD: 54 x 0.5 W SMD 5050
dimensions .............................................................................. 285 x 280 x 125 mm
weight ........................................................................................................ 1.6 kg
power factor ................................................................................................... 0.52
max. link-out current ....................................................................................... 10 A
fuse ...................................................................................................... F1AL 250V
t ......................................................................................................... max. 25 °C
a
t ................................................................................................................. 43 °C
x
t
a
t
x
Use this device with original accessories only. Velleman nv cannot be held responsible in the
event of damage or injury resulting from (incorrect) use of this device. For more info
concerning this product and the latest version of this manual, please visit our website
www.hqpower.eu. The information in this manual is subject to change without prior notice.
© COPYRIGHT NOTICE
The copyright to this manual is owned by Velleman nv. All worldwide rights reserved. No part
of this manual may be copied, reproduced, translated or reduced to any electronic medium or otherwise
without the prior written consent of the copyright holder.
V. 02 – 15/06/2018
Environmental temperature.
Steady-state housing temperature.
HQLP10015
12 ©Velleman nv