Skil 1912 Notice Originale page 6

a
Cross-line laser 1910/1911/1912
INTRODUCTION
• The measuring tool is intended for
determining and checking horizontal
and vertical lines
• The measuring tool is suitable
exclusively for operation in enclosed
working sites
• This tool is not intended for
professional use
• Save these instructions for future
reference and include them with
the measuring tool when giving it
to a third party
TECHNICAL DATA
Working range
(approx.)*
Levelling accuracy ±0.5 mm/m
Self-levelling range ± 4°
Levelling time
Operating
temperature
Storage temperature-20°C to +70°C
Relative humidity
(max.)
Laser class
Laser type
Tripod mount
Battery
Operating time
Weight
Dimensions (length
x width x height)
* Important: under unfavourable
conditions (e.g. in bright light) the tool's
working range will be reduced
15m (1910),
20m (1911/1912)
≤5 seconds
-5°C to +40°C
90%
2
635nm (1910),
520nm (1911/1912)
1/4"
Li-Polymer, 3.7V,
1200mAh
16hrs (1910),
6hrs (1911/1912)
0.26 kg
71 x 61 x 77 mm
TOOL ELEMENTS 1
A Charger interface
B Battery level indicator
C Laser on/off button
D Exit opening for laser beam
E Automatic levelling indicator
F Switch for automatic levelling
/ locking the levelling unit
G Clamp holder*
H Handle
J Tripod mount 1/4"
K 1/4" screw of holder
L Locking screw for holder
M Laser viewing glasses*
N Tripod*
P Charger cable
* NOT STANDARD INCLUDED
SAFETY
• All instructions must be read and
observed in order to work safely
with the measuring tool 2
• Never make warning signs on the
measuring tool unrecognisable
• If the equipment is used in a manner
not specified by the manufacturer, the
protection provided by the equipment
may be impaired
• -The use of other operating
or adjusting equipment or the
application of other processing
methods than those mentioned
here can lead to dangerous
radiation exposure
• Do not direct the laser beam at
persons or animals and do not
stare into the direct or reflected
laser beam yourself, not even
from a distance (you could blind
somebody, cause accidents or
damage your eyes) 4
• If laser radiation strikes your eye,
you must deliberately close your
eyes and immediately turn your
head away from the beam
• Do not make any modifications to
the laser equipment
• Have the measuring tool repaired
only through qualified specialists
using original spare parts (this
ensures that the safety of the
measuring tool is maintained)
• Do not allow children to use
the laser measuring tool
6