baltur BTL 10H Mode D'emploi page 18

DIAGRAM SHOWING HOW TO PLACE THE FLEXIBLE PIPES
* The two flexibles hoses shall be positioned as show on the figure for ensuring correct closing of the cover, they
can come out from the lower side or the left side of the burner.
INSTALLING ON BOYLER
CAUTION: when attaching the burner to the flange position the combustion head axis as illustrated in the
diagram (angle α α α α α ).
18
ONE STAGE LIGHT OIL BURNERS
WITH SLIDING FLANGE:
- Fasten flange (B) to the boiler with n°4
screws (D) placing the insulation card (E);
- Insert burner into flange / boiler and tighten
screw (A) with nut (C).
N° 0002933210
Rev. 22/09/00
N° 0002932940
Rev. 04/10/99