OHAUS Frontier FC5513L Manuel D'instructions page 11

EN-6
2. INSTALLATION
2.1 Unpacking
Carefully remove your centrifuge and each of its components from the package. The included components vary
depending on the centrifuge model (see table below). Save the packaging to ensure safe storage and transport.
The instruction manual must always be kept with the centrifuge!
Rotor(s) / Accessories will be packed separately.
2.1.1 Delivery package for Frontier
2.1.2 Delivery package for Frontier
2.1.3 Delivery package for Frontier
2.2 Selecting the Location
ATTENTION:
Avoid excessive vibrations, heat sources, air current, or rapid temperature changes.
•
The centrifuge should be installed on an even, solid and level surface, if possible, on a laboratory cabinet /
table or some other solid vibration free surface.
•
During centrifugation, the centrifuge must be placed in a way, that there is a minimum space of 30 cm on
each side of the unit, according to the standards EN 61010-2-020.
•
Do not place the centrifuge next to a window or a heater, where it could be exposed to excessive heat, as
the performance of the unit is based on an ambient temperature of 23 °C.
TM
FC5513
Quantity
1
1
1
1
1
1
TM
FC5513R
Quantity
1
1
1
1
1
1
TM
FC5513L
Quantity
1
Angle Rotor 18x1.5/2.0ml Sealable
1
1
1
1
1
1
TM
Frontier Centrifuge FC5513, FC5513R, FC5513L
Description
Centrifuge FC5513
Power Cable
Warranty Card
Instruction Manual
Rotor Key
Rotor Nut
Description
Centrifuge FC5513R
Power Cable
Warranty Card
Instruction Manual
Rotor Key
Rotor Nut
Description
Centrifuge FC5513L
Power Cable
Warranty Card
Instruction Manual
Rotor Key
Rotor Nut