Bond TableFire HYUTT33001-1 Guide D'utilisation page 6

ASSEMBLY INSTRUCTIONS
1. Check that the ignition control knob (L) for
the gas supply system is turned to the "OFF"
position before starting any assembly.
2. Turn the firebowl (A) upside down.
Unscrew and remove the cap on the
electronic igniter (B), then place in the
AA battery (H ) into the battery slot. Be
sure the positive side of the battery
faces outwards. Replace the electronic
igniter cap over the battery; be sure to
tighten securely.
3. Unscrew and remove the fixing nut
(D) from the threaded post, then
attach the fixing plate (C) onto the
bottom of the firebowl body (A) using
4 M4 screws (N). Be sure to tighten
securely.
Bond Manufacturing Co., Inc | Page 6
H
B
A
D
A
L
N
C