Publicité
Les langues disponibles
Les langues disponibles
REVERSING THE DOOR SWING
2
REMOVE REFRIGERATOR DOOR
1. Remove all food from the inner door liner.
2. Tape the door shut with masking tape.
3. Remove the center hinge by removing two
hinge screws with a 5/16? socket and ratchet.
Save the center hinge and screws.
4. Remove the tape and tilt the door away from
the cabinet. Lift the door straight up to free its
bottom socket from the pin in the bottom hinge
bracket.
5. Transfer plastic bushing from right side of top of
refrigerator door to the left side.
6. Set the door on a non-scratching surface with
the inside up.
7. Install the 2 hole plugs from the opposite side of
the cabinet to the screw holes vacated by the
center hinge removal.
29-6144
Installation Instructions
(CONT.)
3
TRANSFER BOTTOM HINGE TO THE
LEFT
1. Using a 5/16" Socket
and ratchet, remove
the 2 screws from the
bottom hinge.
2. Move the bottom hinge
pin from the right to the
left side with a thin-
blade screwdriver until
the shoulder of the
hinge pin is touching
the hinge.
3. Move the bottom hinge
from the right to the left
side and tighten the 2
screws.
4. Install the 2 hole plugs
from the opposite side
of the cabinet to the
screw holes vacated
by the bottom hinge re-
moval.
4
TRANSFER DOOR STOP TO THE LEFT
1. On both the refrigerator and freezer doors, re-
move the screws from the door stop on the
right with a Phillips screwdriver.
2. Install the door stop on the left of each door.
13
Publicité
