Publicité
Les langues disponibles
Les langues disponibles
REVERSING THE DOOR SWING
REHANG THE REFRIGERATOR DOOR
7
1. Lower the refrigerator door onto the bottom
hinge pin.
2. While holding the door securely, use the new
left-hand middle hinge from the accessory kit
insert hinge pin into socket in door. Attach the
center hinge with two screws with a 5/16"
socket and ratchet.
29-6144
Installation Instructions
(CONT.)
REHANG THE FREEZER DOOR
8
1. Lower the freezer door onto the center hinge
pin.
2. Place the left top hinge so the pin fits into the
door socket. (Left top hinge and cover can be
found inside of the product. Call GE A Appli-
ances service support at 800.561.3344 if parts
are missing. Support the door on the handle
side and make sure the door is straight and the
gap between the doors is even across the front.
While holding the door in place, tighten the top
hinge screws. Do not overtighten these screws.
Tighten them until they are just snug, and then
turn them another one-half turn.
3. Snap the left top hinge cover over the hinge.
15
Publicité
