Explanation Of Displays And Buttons; Assembly - Becker Centronic SensorControl SC431-II Notice De Montage Et D'utilisation

• Ensure that the control unit is not installed or operated
close to metal surfaces or magnetic fields.
• Radio-controlled systems transmitting on the same fre-
quency may cause reception interference.
•
Note that the range of the radio signal is limited by legis-
lation as well as by design.

Explanation of displays and buttons

1. Indicator lamp
2. Manual/auto button
3. Up/stop/down/stop button
4. Snap-in hook
5. Twilight threshold regulator
6. Sun threshold regulator
7. Light sensor
8. Programming button for radio
9. On/off button for glass breakage function
10. Setting tool
Check that the transmitter and receiver are functioning per-
fectly prior to installation in the desired location.
The sensor can be attached without difficulty to any smooth window glass.
The window must be cleaned thoroughly before mounting the sensor.

Assembly

19 - en