Blackstone 1939 Manuel Du Propriétaire page 6

OWNER'S MANUAL | ASSEMBLY GUIDE
Remove the stand from the packaging and use the (8) M6x12
STEP 03
bolts (removed during step 2) to attach the legs to the bottom of the
griddle body�
loosen the thumbscrews on the stand legs, then extend the
STEP 05
four leg extensions in the stand legs� Adjust each leg extension to
desired height, then tighten the thumbscrew to secure�
06
open the stand legs� (When the legs are fully opened, the
STEP 04
locking pins will engage� To close the legs, pull the locking pins�)
Place the gridle upright� loosen the four (4) bolts on the
STEP 06
right side of the griddle body, then hang the side shelf on the bolts
and press down to lock the shelf in place� Retighten the bolts to keep
the side shelf stable�
Models: 1939 • 1945
locking Pin locking Pin
BLACKSTONEPRODUCTS.COM/SUPPORT