5. OPERATION
SETTING THE THERMOSTAT KNOB
The temperature of the freezer is controlled with a thermostat knob from MIN (less cold) MID (intermediary) and MAX
(coldest) Changes of the ambient temperature affect temperature in the interior of the appliance so choose a correct
setting of the temperature control knob, depending on your ambient conditions.
Set the thermostat knob to MID position to achieve -18°C in the freezer compartment.
Please Note:
If the appliance is switched off you must wait at least 5 minutes before restarting the appliance or re-inserting the plug
into the wall outlet.
This is to allow the protection device in the compressor to reset.
If the compressor fails to start correctly remove the plug and wait for 5 minutes before you try again then the
compressor should restart normally.
The storage temperature may be affected by:
• The room temperature
• How often the door is opened
• How much food is stored
• Position of the appliance
When you set the correct temperature, all these factors mentioned above shall be taken into account.
- 27 -