Shoulder Strap - Makita US053D Manuel D'instruction

ASSEMBLY
CAUTION:
Always be sure that the machine is switched off and the battery cartridge is removed before carrying out any work on
the machine.
CAUTION:
Make sure that the all parts are securely assembled so that the liquid does not leak when operating the machine.
Assembly of the spray wand
1. Remove the cap from the handle.
2. Make sure the O-ring is in place, then thread the spray wand onto the handle and tighten it securely. Refer to
Figure 1.
3. Loosen the extension nut and pull out the spray wand to the desire length.
4. Retighten the extension nut.
1

Shoulder strap

Attach the shoulder strap to the hangers of the machine as shown in the figure. Refer to Figure 2.
2
1 Adjustable spray head
3 Spray wand
5 Handle
1
1 Hanger
3
2 Extension nut
4 O-ring
Figure 1
Figure 2
8 English
4 5