Publicité
Les langues disponibles
Les langues disponibles
2
1
Install the appliance in the
niche.
Push the appliance in the
direction of the arrows (1)
until the upper gap cover
stops against the kitchen
furniture. Make sure that
the distance between the
appliance and the cup-
board front-edge is 44 mm.
Push the appliance in the
direction of the arrows (2)
against the cupboard on the
opposite side of the hinge.
Make sure that the clear-
ance between the appliance
and the cupboard is 4 mm.
Remove the correct part
from the hinge cover (E).
Make sure to remove the
part DX, in the case of right
hinge, SX in opposite case.
28
4mm
44mm
Adjust the appliance in the
niche.
The lower hinge cover (in
the accessories bag) makes
sure that the distance be-
tween the appliance and the
kitchen furniture is correct.
Open the door. Put the low-
er hinge cover in position.
C
D
E
E
Attach the covers (C, D) to
the lugs and the hinge
holes.
Attach the hinge covers (E)
to the hinge.
I
I
Attach the appliance to the
niche with 4 screws.
Ha
Hb
Hc
Hd
Disconnect the parts (Ha),
(Hb), (Hc) and (Hd).
Push the sealing strip be-
tween the appliance and the
adjacent cabinet.
ca. 50 mm
90°
21 mm
90°
ca. 50 mm
21 mm
Install the part (Ha) on the
inner side of the kitchen
furniture.
Publicité
