Publicité
Les langues disponibles
Les langues disponibles
2.
Align the hole in the lower handle with the hole
in the upper handle, then insert the bolts from inside,
then attach washer B from outside, and then tighten the
thumb nuts.
Fig.3
► 1. Upper handle 2. Hole 3. Washer B 4. Thumb nut
5. Lower handle 6. Bolt
CAUTION:
Hold the upper handle firmly so
that it does not drop off your hand. Otherwise, the
handle may fall and cause an injury.
3.
Attach holder A and holder B to the handle.
Position the cords as shown in the figure.
1
2
Fig.4
► 1. Cord 2. Holder A 3. Holder B
NOTE: When attaching holder A, be sure to fix the
cord with the holder as shown in the figure.
1
6
2
3
5
4
3
Removing the mulching attachment
1.
Open the rear cover.
Fig.5
► 1. Rear cover
2.
Remove the mulching attachment while holding
down the lever.
2
Fig.6
► 1. Lever 2. Mulching attachment
Assembling the grass basket
1.
Pick up the upper clip of the grass basket.
1
Fig.7
► 1. Upper clip
7 ENGLISH
1
1
Publicité
