Publicité
Les langues disponibles
Les langues disponibles
English
R AC K DR Y C Y C L E
GDE/GDG
750AW
GDE/GDG
750AW
1.
Turn the knob to any program except "OFF" to power on. The control panel
will beep once and the dryer will change from "OFF" to the operating status.
If Start/Pause button is not pressed five minutes after powering on, the dryer
will automatically return to OFF status.
2.
Set the cycle select dial to Rack Dry Cycle.
3.
Press "Timed Dry" button to set the required drying time.
4-6. Press "Temp" and "Signal" to define the required programs.
Note: For "Rack Dry" program use of "Temp" and "Signal" buttons is the
same as for auto-programs. "Dry Level" is inactive.
Other Features
Your dryer also has the following features for your convenience:
Lint Filter:
• All dryers come with a lint filter that needs to be cleaned before or after every
use (read "Care and Cleaning Guide" Section).
Leveling Legs:
• Your dryer has four leveling legs which are located in the front and rear corners
of your dryer. After installing your dryer in its final position, you can level your
dryer.
• Leveling legs can be adjusted by turning them clockwise to raise your dryer or
by turning them counterclockwise to lower your dryer.
27
All manuals and user guides at all-guides.com
Cycle Select
Off
Timed Dry
More
High
No rmal
Medium
Less
Low
Rack D ry
No Heat
Dry
Level
Temp
Touch Up
Whites
Delicates
Timed Dry
Auto Dry
Clean Lint
90
Heavy Duty
Louder
60
Drying
Softer
30
Cool Down
Off
20
Normal
W rinkle Saver
10
Cycle Process
Signal
Timed Dry
Publicité
