Maytag Commercial MAT24PD Instructions page 17

CODE
6.xx REGULAR CYCLE PRICE*
6.08 Amount to Start for NORMAL Cycle. Represents the number of
NORMAL Coins or Debit pulses required to start the cycle. See Value of
Coin 1. Adjustable from 0 to 200.
PD models default setting is 8 - PR models default setting is 0.
g Press the NORMAL keypad once to advance to next code.
6.07 Amount to Start for DELICATES Cycle. Represents the number of
DELICATES Coins or Debit pulses required to start the base cycle. See Value
of Coin 1. Adjustable from 0 to 200.
PD models default setting is 7 - PR models default setting is 0.
g Press the NORMAL keypad once to advance to next code.
6.07 Amount to Start for POWERWASH Cycle. Represents the number
POWERWASH of Coins or Debit pulses required to start the cycle. See Value of
Coin 1. Adjustable from 0 to 200.
PD models default setting is 7 - PR models default setting is 0.
g Press the NORMAL keypad once to advance to next code.
6.07 Amount to Start for NORMAL ECO Cycle. Represents the number
NORMAL of Coins or Debit pulses required to start the base cycle. See
ECO Value of Coin 1. Adjustable from 0 to 200.
PD models default setting is 7 - PR models default setting is 0.
g Press the NORMAL keypad once to advance to next code.
7.00 ADDITIONAL WASH TIME*
7.00 This is the number of minutes that can be added to a Wash Cycle.
Choose from 00–05 minutes by pressing the POWERWASH keypad.
g Press the NORMAL keypad once to advance to next code.
8.00 ADDITIONAL RINSE TIME*
8.00 This is the number of minutes that can be added to a
RINSE Cycle. Choose from 00–05 minutes by pressing the
POWERWASH keypad.
g Press the NORMAL keypad once to advance to next code.
9.00 CYCLE COUNTER OPTION*
This option is either SELECTED "ON" or NOT SELECTED "OFF."
9.00 Not Selected "OFF."
9.0C Selected "ON" and not able to be deselected.
Press the DELICATES keypad three consecutive times to select
"ON." Once selected "ON" it cannot be deselected.
g Press the NORMAL keypad once to advance to next code.
MONEY COUNTER OPTION*
1.00
This option is either SELECTED "ON" or NOT SELECTED "OFF."
1.00 Not Selected "OFF."
1.0C Selected "ON."
Press the DELICATES keypad three consecutive times to select
"ON" and three consecutive times to remove (Not Selected
"OFF.") Counter resets by going from "ON" to "OFF."
1.C0 Selected "ON" and not able to be deselected.
To select "ON" and not able to be deselected, first select "ON,"
then within two seconds press the DELICATES keypad twice,
the POWERWASH keypad once, and exit the set-up mode.
g Press the NORMAL keypad once to advance to next code.
SPECIAL PRICING OPTION
2.00
This option is either SELECTED "ON" or NOT SELECTED "OFF."
2.00 Not Selected "OFF."
2.SP Selected "ON." Press the DELICATES keypad once for this
selection.
If SPECIAL PRICING OPTION is selected, there is access to codes "3."
through "9.".
NOTE: An external battery needs to be added to keep the clock running during
periods of power outages.
g Press the NORMAL keypad once to advance to next code.
EXPLANATION CODE
OPTIONS TO USE IF SPECIAL PRICING IS SELECTED:
SPECIAL TIME CYCLE PRICE
3.xx
3.07 DELICATES Special Price Cycle Amount to Start. Represents
DELICATES the number of Coins or Debit pulses required to start the Special
Price cycle. See Value of Coin 1. Adjustable from 0 to 200.
PD models default setting is 7 - PR models default setting is 0.
g Press the NORMAL keypad once to advance to next code.
3.07 NORMAL ECO Special Price Cycle Amount to Start. Represents
NORMAL ECO the number of Coins or Debit pulses required to start the Special
Price cycle. See Value of Coin 1. Adjustable from 0 to 200.
PD models default setting is 7 - PR models default setting is 0.
g Press the NORMAL keypad once to advance to next code.
3.07 POWERWASH Special Price Cycle Amount to Start. Represents
POWERWASH the number of Coins or Debit pulses required to start the Special
Price cycle. See Value of Coin 1. Adjustable from 0 to 200.
PD models default setting is 7 - PR models default setting is 0.
g Press the NORMAL keypad once to advance to next code.
3.08 NORMAL Special Price Cycle Amount to Start. Represents the
NORMAL number of Coins or Debit pulses required to start the Special
Price cycle. See Value of Coin 1. Adjustable from 0 to 200.
PD models default setting is 7 - PR models default setting is 0.
g Press the NORMAL keypad once to advance to next code.
5.00 TIME-OF-DAY CLOCK, MINUTES
5.00 This is the TIME-OF-DAY CLOCK, minute setting; select
between 0 and 59 minutes by pressing the POWERWASH or
TEMPERATURE keypad.
g Press the NORMAL keypad once to advance to next code.
6.00 TIME-OF-DAY CLOCK, HOURS
NOTE: Uses 24 hour clock.
6.00 This is the TIME-OF-DAY CLOCK, hour setting; select between
0 and 23 hours by pressing the POWERWASH or TEMPERATURE
keypad.
g Press the NORMAL keypad once to advance to next code.
7.00 SPECIAL PRICE START HOUR
NOTE: Uses 24 hour clock.
7.00 This is the start hour; select between 0 and 23 hours by pressing
the POWERWASH or TEMPERATURE keypad.
g Press the NORMAL keypad once to advance to next code.
SPECIAL PRICE STOP HOUR
8.00
NOTE: Uses 24 hour clock.
8.00 This is the stop hour; select between 0 and 23 hours by pressing
the POWERWASH or TEMPERATURE keypad.
g Press the NORMAL keypad once to advance to next code.
SPECIAL PRICE DAY
9.00
9.10 This represents the day of the week and whether special pricing
is selected for that day. A number followed by "0" indicates no
selection that particular day (9.10). A number followed by an "S"
indicates selected for that day (9.1S).
Days of the week (1–7) can be chosen by pressing the
POWERWASH keypad. Press the POWERWASH keypad once to
select special pricing for each day chosen.
When exiting set-up code "9," the display must show current day
of week:
DISPLAY
10
20
30
40
50
60
70
g Press the NORMAL keypad once to advance to next code.
EXPLANATION
DAY OF WEEK CODE (selected)
Day 1 = Sunday 1S
Day 2 = Monday 2S
Day 3 = Tuesday 3S
Day 4 = Wednesday 4S
Day 5 = Thursday 5S
Day 6 = Friday
Day 7 = Saturday
6S
7S
17