Product Description And Specifications - Bosch Uneo Maxx Notice Originale

14 | English
Product Description and
Specifications
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.
Intended Use
The power tool is intended for hammer drilling in concrete,
brick and stone. It is also suitable for drilling without impact
in wood, metal, ceramic and plastic. Power tools with elec-
tronic control and right/left rotation are also suitable for
screwdriving.
Product Features
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1) SDS-Quick/hexagonal tool holder
(2) Dust protection cap
Locking sleeve
(3)
(4) "Drilling/hammer drilling" selector switch
(5) Right rotational direction indicator
(6) Left rotational direction indicator
(7) Rotational direction switch
(8) On/off switch
(9) Battery charge indicator
A)
(10) Battery
(11) "PowerLight"
A)
(12) Universal bit holder
A)
(13) Screwdriver bit
(14) Screwdriver bit with ball catch
(15) Drill bit with hexagonal shank
(16) Drill bit with SDS-Quick tool holder
(17) Handle (insulated gripping surface)
(18) Battery release button
A)
(19) Keyless chuck
(20) Front sleeve of the keyless chuck
(21) Rear sleeve of the keyless chuck
A) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
Technical Data
Cordless rotary hammer
Article number
Rated voltage
Rated speed
1 609 92A 4WH | (31.03.2020)
Cordless rotary hammer
Impact rate
Impact energy per stroke ac-
cording to EPTA-Procedure
05:2016
Tool holder
Max. drilling diameter
– Concrete (with twist drill
– Steel
– Wood
– Wood (with flat milling
Weight according to EPTA-
Procedure 01:2014
Recommended ambient tem-
perature during charging
Permitted ambient temperat-
ure during operation
during storage
Recommended batteries
Recommended chargers
A) Limited performance at temperatures <0 °C
B) The following chargers are not compatible with the PBA re-
Technical data determined using the battery that comes with the
product.
Noise/Vibration Information
Noise emission values determined according to
EN 60745-2-6.
Typically, the A-weighted noise level of the power tool is:
Sound pressure level 85 dB(A); sound power level
A)
96 dB(A). Uncertainty K = 3 dB.
A)
Wear hearing protection!
A)
Total vibration values a
determined according to EN 60745-2-6, EN 62841-2-1:
Hammer drilling into concrete: a
Drilling into metal: a
A) Screwdriving: a
The vibration level and noise emission value given in these
A)
instructions have been measured in accordance with a
standardised measuring procedure and may be used to com-
pare power tools. They may also be used for a preliminary
estimation of vibration and noise emissions.
The stated vibration level and noise emission value repres-
ent the main applications of the power tool. However, if the
Uneo Maxx
power tool is used for other applications, with different ap-
3 603 J52 3.. plication tools or is poorly maintained, the vibration level
and noise emission value may differ. This may significantly
V= 18
increase the vibration and noise emissions over the total
–1
min 0–900
working period.
min
bit)
drill)
A)
and
B)
chargeable battery: AL 1814 CV, AL 1820 CV, AL 1860 CV
(triax vector sum) and uncertainty K
h
=13 m/s
h
2
=4 m/s , K=1.5 m/s
h
2
=2.5 m/s , K=1.5 m/s
h
Uneo Maxx
–1
0−5000
J 0.6
– SDS quick
– Hexagonal
mm 10
mm 8
mm 10
mm 20
kg 2.0
°C 0 to +35
°C –20 to +50
PBA 18V...W-.
AL 18...
2 2
, K=3 m/s ,
2
,
2
,
Bosch Power Tools