Publicité
Les langues disponibles
Les langues disponibles
Installation
Extraction air system assembly
The hob and the fan can be connected with a fl exible hose or a fl at
duct.
The exhaust air components for on these two options are supplied
with the hob and are fi tted into each other according to the illustration.
Shorten the fl at duct with a fi ne saw if necessary.
a
b
Option
Flexible hose
c
e
d
c
On point
The fl exible connection piece is used for a worktop thickness of
600 mm. Please make sure that installation is as taut and crease-
free as possible by shortening excess material.
f
On point
Apply sealing tape to the plinth fan connecting pieces (f) before
attaching the adapter piece (d) to the plinth fan (e).
Important:
The components must all be fi rmly fastened as shown with the
adhesive tape enclosed after they have been attached.
Exhaust air duct components (inclusive)
a
b
b
c
Option
Rectangular tube
c
e
e
d
Fan
f
Dichtband
Plinth fi lter (optional):
g
Charcoal fi lter
or
or
d
or
or
GB
41
Publicité
