Philips HX9992/11 Mode D'emploi page 7

8
English
Electromagnetic fields (EMF)
Radio Equipment Directive
- To charge the battery, only use the USB wall
adapter, charging base and charging travel case
provided with the product: WAA1001, WAA2001,
HX9200 or HX9200/B, and TCC1001, TCC2001,
TCC3001, CBB1001 or CBB2001. Do not use an
extension cord.
- Charge, use and store the product at a
temperature between 0 °C and 40 °C.
- Keep product and batteries away from fire and do
not expose them to direct sunlight or high
temperatures.
- If the product becomes abnormally hot or smelly,
changes color or if charging takes longer than
usual, stop using and charging the product and
contact Philips.
- Do not place products and their batteries in
microwave ovens or on induction cookers.
- Do not open, modify, pierce, damage or dismantle
the product or battery to prevent batteries from
heating up or releasing toxic or hazardous
substances. Do not short-circuit, overcharge or
reverse charge batteries.
- If batteries are damaged or leaking, avoid contact
with the skin or eyes. If this occurs, immediately
rinse well with water and seek medical care.
This Philips appliance complies with all applicable
standards and regulations regarding exposure to
electromagnetic fields.
Hereby, Philips declares that electric tootbrushes
equipped with a radio frequency interface (Bluetooth
or BrushSync) are in compliance with Directive
2014/53/EU.
- Bluetooth radio frequency: 2.4 GHz
- Maximum Bluetooth radio frequency power: 3 dBm
- NFC radio frequency: 13.56 MHz
- Maximum NFC radio frequency power: 30.16 dBm