Siemens ME400FQ1 Mode D'emploi page 12

en Contents
Congratulations on the purchase of your
new Siemens appliance. You can find
further information about our products
on our website.
Contents
Intended use .............................................10
Important safety information .....................10
Overview...................................................12
Start lock-out ............................................12
Symbols and markings .............................12
Operation ..................................................12
Cleaning and maintenance .......................14
Recipes.....................................................14
Disposal ....................................................15
Guarantee.................................................15
Overview
Please fold out the illustrated pages.
X Fig. A
1 Motor unit (with cord store)
2 Switch
f = Switch off appliance
1 = Switch on appliance / low speed
2 = Switch on appliance / high speed
3 Catch
4 Pulp container
5 Juice jug with lid
6 Filter tray
a Outlet
b Lock
Important information
– When switching on the appliance,
ensure that the lock is open
(lock at top / À). When the lock is open,
the juice flows into the juice jug.
– Before emptying the juice jug, switch off
the appliance (f) and close the lock
(press downwards / Á). This will stop
more juice from running out and prevent
soiling of the work surface.
7 Filter with ceramic shredding blades
8 Lid
9 Filling shaft
10 Pusher
11 Cord store
12
Start lock-out
The appliance cannot be switched
on unless
– the filter tray and lid have been attached
correctly and
– the catch has been engaged correctly.
Before using the appliance, always check
that the lid is locked! Before switching on
the appliance for the first time, remove
all the packaging material!
Symbols and markings
Symbol Meaning
À
The lock is open!
Á
The lock is closed!
Operation
X Fig. B
Assembly
W Risk of injury
– Do not use the appliance if the power
cord and/or appliance are damaged.
– Before use, always check the entire
appliance, in particular the filter and filter
tray, for damage (cracks, flaws).
– Do not touch shredding blades /
blades on the base of the filter.
– Be careful when closing the catch,
otherwise you may trap your fingers.
■ Pull cord out of the cord store to the
required length.
■ Insert filter tray into the motor unit.
■ Insert filter and press down until it
clicks into position. The filter must fit
firmly on the drive! Check for damage
beforehand!
■ Insert the pulp container into the motor
unit.
■ Attach the lid.
■ Swivel the catch onto the lid until it
audibly clicks into position.