How To Remove: Shelf Supports; How To Use: Pyrolytic Cleaning - AEG BSB578270M Notice D'utilisation

CARE AND CLEANING
Clean all accessories after each use and let them dry. Use a soft cloth with
warm water and a mild detergent. Do not clean the accessories in a dishwash‐
er.
Do not clean the non-stick accessories using abrasive cleaner or sharp-edged
Accessories
objects.

12.2 How to remove: Shelf supports

Remove the shelf supports to clean the oven.
Step 1 Turn off the oven and wait until
it is cold.
Step 2 Pull the front of the shelf sup‐
port away from the side wall.
Step 3 Pull the rear end of the shelf
support away from the side wall
and remove it.
Step 4 Install the shelf supports in the
opposite sequence.

12.3 How to use: Pyrolytic Cleaning

Clean the oven with Pyrolytic Cleaning.
WARNING!
There is a risk of burns.
CAUTION!
If there are other appliances installed in the same cabinet, do not use them at the
same time as this function. It can cause damage to the oven.
Turn off the oven and wait
until it is cold.
80/184
Before the Pyrolytic Cleaning:
Remove all accessories.
1
2
Clean the oven floor and the in‐
ner door glass with warm water,
a soft cloth and a mild detergent.