Philips Lumea SC1997 Mode D'emploi page 17

18
English
Skin type Skin tone
I White; You always sunburn, never tan.
II Beige; You easily sunburn, tan minimally.
III Light brown; You sunburn easily, tan slowly to light
brown.
IV Mid brown; You rarely sunburn, tan easily.
V Dark brown; You rarely sunburn, tan very easily.
VI Brownish black or darker; You rarely or never sunburn,
very dark tanning.
Handling the device
2 To adjust the light intensity setting, press the on/off button one or more
times until you have reached the required setting. The corresponding
intensity light lights up white.
Note: The device automatically disables when your skin tone is too dark,
to prevent you from developing skin reactions. The integrated skin tone
sensor does not tell you which light intensity setting to use, as Philips
Lumea gives you the freedom to select the light intensity that you find
most convenient.
3 Lumea should never be painful. If you experience discomfort, reduce the
light intensity setting.
4 After recent tanning, perform a skin test to determine the right light
intensity setting.
Note: To check if your skin type allows usage of the device, consult the skin
tone table with number 2 on the foldout page.
Note: Your skin may react differently on different days/occasions for a
number of reasons.
1 Before use, clean the attachments and the light exit window.
2 Put the small plug in the device and put the adapter in the wall socket.
3 Switch on the device and select the right light intensity for your skin tone.
Light intensity setting
4/5
4/5
4/5
3/4
You cannot use the device
You cannot use the device