Publicité
Les langues disponibles
Les langues disponibles
Start up Instructions
Congratulations!
Step 1:
Turn on water supply at angle stop and open the Adapt-a-Valve. Turn
faucet handle to the open position to start the flow of water through the
unit. Run 3 gallons of water through the unit in order to flush out the
normal black carbon fines (it will "sputter" until the air is purged out)
from the unit. Initially, the water may appear cloudy which is due to tiny
air bubbles and it will clear up shortly. Close the faucet when finished.
Step 2:
Check for leaks. If you have any leaks, shut off the water supply to your
system, tighten any fittings / housings and restart unit.
Check frequently over the next 24 hours to ensure no leaks are present
NOTICE
OPERATION
You have completed the installation of your new water filtration system. Please Follow the
Startup Instructions.
Page 11
OFF
ON
Publicité
