Kemper WeldFil Compact Serie Notice D'utilisation page 397

Fehle r! D oku mentvariable nicht defin iert.
9.2 UKCA Declaration of Confirmity
Designation:
Series:
Type:
Machine ID:
Company:
The following designated standards and technical specifications have been applied:
BS EN ISO 12100:2010 Safety of machinery - General principles for design
BS EN ISO 13857:2019 Safety of machinery - Safety distances
BS EN ISO 13854:2019 Safety of machinery
BS EN ISO 21904-1:2020 Health and safety in welding and allied processes
BS EN ISO 4414:2010 fluid power - General rules and safety requirements for systems and
their components
BS EN IEC 61000-6-2:2019 Electromagnetic compatibility (EMC) - Part 6-2: Generic
standards - Immunity standard for industrial environments
BS EN IEC 61000-6-4:2019 Electromagnetic compatibility (EMC) - Part 6-4: Generic
standards - Emission standard for industrial environments
BS EN 60204-1:2018 Safety of machinery - Electrical equipment of machines
BS EN ISO 13849-1:2016 Safety of machinery - Safety-related parts of control systems
ETSI EN 301 489-1 Electromagnetic Compatibility (EMC)
ETSI EN 301 489-52 Electromagnetic Compatibility (EMC)
ETSI EN 301 511 Global System for Mobile communications (GSM)
ETSI EN 301 908-2 IMT cellular networks
A complete list of standards, directives and specifications applied is available from the
manufacturer. The operating manual belonging to the product is available.
Additional information:
If it is not used for as intended or the design is altered, the Declaration of Conformity
expires, unless confirmed in writing by us as manufacturers.
Vreden, 05.10.2021
Place, date
1502783-02
Welding fume filter unit
WeldFil Compact
3420, 3430, 3440, 3450, 3465, 3485 (possibly different article
numbers for other product variants)
See name plate in front section of this operating manual
This product is developed, designed and manufactured in
accordance with the UKCA directives
Supply of Machinery (safety) Regulations 2008
The product continues to comply with the provisions of the
Radio Equipment Regulations 2017
Electromagnetic Compatibility Regulations 2016
Electrical Equipment (Safety) Regulations 2016
Pressure Equipment Regulations 2016
At the sole responsibility of
KEMPER GmbH
Von-Siemens-Str. 20, D-48691 Vreden
B. KEMPER
- 397 -
CEO
Identification of the signatory
PT