Publicité
Les langues disponibles
Les langues disponibles
1. Power button
Press the power button to turn on the appliance. The appliance will start to work.
Press the button again, the appliance will be turned off.
2. Temperature/timer increasing button & temperature/timer decreasing button
Press the button "+"/ "-" on the control panel or "
room temperature from 15℃ to 31℃. The buttons can also be used for timer adjustment during timer
setting. The value will be increased/decreased by 1 (℃/hour) for each press.
3. Fan speed button
Press the fan speed button to switch the fan speed between low and high. The corresponding indicator
light "LOW"/ "HIGH" will illuminate.
4. Mode button
Press the mode button to choose your desired working mode among COOL, DEHUM, and FAN. The
corresponding indicator light will turn on when the specific mode is selected.
•
Cooling mode
When the room temperature is higher than the set temperature, the compressor starts to run.
When the room temperature is lower than the set temperature, the compressor stops and the fan
operates at the original set speed.
Note: When the compressor is working, the unit will vibrate slightly. This is normal and harmless.
•
Dehumidifying mode
On dehumidifying mode, the fan runs at a low speed. The fan speed and temperature cannot be adjusted.
The compressor will stop after 8 minutes of running and then run again after 6 minutes; it will repeat in
this way.
•
Fan mode
When the fan runs at the set speed, the compressor does not run.
The adjustment of temperature in Fan mode is not effective.
5. Timer button
Auto-ON setting
When the appliance is OFF, press the timer button, the timer indicator light will flash.
-
Press the timer increasing or decreasing button to select a desired auto-ON time from 1 to 24 hours.
-
The timer indicator light will flash for several seconds, then illuminate still; The digital display will be off.
The timer setting is confirmed.
You can choose the fan speed or mode at the same time.
-
The appliance will automatically turn on once the select time passed.
-
Auto-OFF setting
When the appliance is ON, press the timer button, the timer indicator light will flash.
-
Press the timer increasing or decreasing button to select a desired auto-OFF time from 1 to 24 hours.
-
The timer indicator light will flash for several seconds, then illuminate still. The timer setting is
confirmed.
The appliance will automatically turn off once the select time has passed.
-
To cancel the timer, press the timer button, when the timer indicator light flashes press the timer button again.
The timer indicator light will then be off.
NOTE:
The protective device may trip and stop the appliance in the conditions listed below.
Cooling
Dehumidifying
If the appliance runs in cooling or dehumidrying mode with door or window opened for a long time when
relative humidity is above 80%, dew may drip down from the air outlet.
Room temperature is over 43℃.
Room temperature is below 15℃.
Room temperature is below 15℃.
"/"
" on the remote control to set your desired
- 6 -
Publicité
