Publicité
Les langues disponibles
Les langues disponibles
3
Screw the original deflection rod (Orig.) to the gear lever (1) (min. 6 thread);
secure using the corresponding nut.
Screw the shift gear (1) to the vehicle using the original screw (Orig.).
WARNING: Use a liquid threadlocker!
Tighten the original screw (Orig.) according to the manufacturer's
instructions.
Adjust the tread (2) according to your driving habits.
Then tighten the screw (3) as specified in the mounting instructions.
The content translation is automated.
© SW-MOTECH GmbH & Co. KG
MOUNTING STEP · READ AND KEEP MOUNTING INSTRUCTIONS!
6
Errors and omissions excepted
Subject to technical and design changes.
Publicité
