Publicité
Les langues disponibles
Les langues disponibles
All manuals and user guides at all-guides.com
to use your mill
supplied)
1 Put your ingredients into the jar.
Fill it no more than half full.
2 Fit the sealing ring
blade unit
- ensuring the seal
is located correctly in the
grooved area.
G
Leaking will occur if the
seal is damaged or
incorrectly fitted.
3 Clip the blade unit
base
.
4 Turn the mill blade assembly
upside down. Lower it into the
jar
, blades down. Turn in a
clockwise direction to lock.
5 Place the mill onto the power
unit.
6 Select a speed or use the pulse
control (refer to the
recommended speed chart).
7 After milling, you can replace the
blade assembly with the mill lid
.
care and cleaning
(if
G
G
into the
G
G
G
into the
G
G
1 Unscrew the blender or mill
G
2 Remove and wash the sealing
3 Don't touch the sharp blades –
4 Leave to dry upside down.
7
Always switch off, unplug and
dismantle before cleaning.
Empty the goblet before
unscrewing it from the blade
unit.
Don't immerse the blade unit in
water.
The goblet can be washed in
your dishwasher.
power unit
Wipe with a damp cloth, then
dry.
Don't immerse the power unit in
water.
Store excess cord in the storage
area at the back of the power
unit
.
blade assembly
base from the goblet/jar. Then
remove the blade unit by
pushing up from underneath.
Care should be taken
when removing the blade
unit from the base.
ring.
brush them clean using hot
soapy water, then rinse
thoroughly under the tap. Don't
immerse the blade unit in
water.
other parts
Wash by hand, then dry.
Publicité
