Publicité
Les langues disponibles
Les langues disponibles
Log Number
finishing
EN
1
10.2 CBLP46 log placement
2
3
WARNING
!
4
5
•
Failure to position the logs in accordance with these diagrams or failure to use only logs specifi cally approved
with this appliance may result in property damage or personal injury.
6
•
Logs must be placed in their exact location in the appliance. Do not modify the proper log positions, since
7
appliance may not function properly and delayed ignition may occur.
•
The logs are fragile and should be handled with care.
8
9
PHAZER
logs and glowing embers exclusive to Continental, provide a unique and realistic glowing effect that is dif-
TM
ferent in every installation. Take the time to carefully position the glowing embers for a maximum glowing effect. Log
10
colours may vary. During the initial use of the appliance, the colours will become more uniform as colour pigments
burn in during the heat activated curing process. Blocked burner ports can cause an incorrect flame pattern.
note:
Studs marked with an "X" must be
removed prior to installation.
Air Intake
IF APPLICABLE, INSERT DRAWING OF BURNER/SUPPORT WITH APPROPRIATE LA-
Media Tray
A
48
W415-4063 / A /01.27.23
NOTE: ENSURE NOMENCLATURE IS
6
CONSISTENT THROUGHOUT.
Part Number
BELS (I.E. STUDS, PILOT SHIELD, BURNER PORTS, ETC.).
IF NOT APPLICABLE, HIDE THIS SECTION AND USE BOXES BELOW.
Stud B
Stud A
Burner Overview
3
B
C
D
PLACE TEXT BOX HERE.
3
2
Description
Media Barrier
Stud D
Pilot Light
Stud C
Cover
2
A
2
PLACE TEXT BOX HERE.
NOTE: ENSURE NOMENCLATURE IS
6
CONSISTENT THROUGHOUT.
48.1
Burner
3
5
3
Publicité
