Samsung WF433B GJ Serie Manuel D'utilisation page 39

ERROR CODE
tE
3E
2E
AE
8E
SF1
SF2
SF3
SUdS
For any codes not listed above, call 1–800–726–7864 (1–800–SAMSUNG)
WF433BGJ-03159C-02_EN_20120829.indd Sec7:39 WF433BGJ-03159C-02_EN_20120829.indd Sec7:39
A temperature sensor problem.
Restart the cycle. If the code reappears, call customer service.
A motor problem.
Restart the cycle. If the code reappears, call customer service.
High/Low voltage detected.
Restart the cycle. If the code reappears, call customer service.
A Communication error between the SUB(Sensor) PBA and the MAIN PBA
Call customer service.
A MEMS sensor problem.
Call customer service.
A system error
Call customer service.
Too many suds are detected during the wash session. The unit is put on hold until
the amount of suds have been reduced. The unit will then go back to operating.
When it fi nishes washing, the "End" and "SUdS" codes will blink in turn.
MEANING & SOLUTION
troubleshooting _39
2012-08-31 2012-08-31 12:35:33 12:35:33