Samsung WF433B GJ Serie Manuel D'utilisation page 33

Les langues disponibles

CLEANING THE DEBRIS FILTER

We recommend cleaning the debris filter when water does not drain well or the "nd" error message is displayed.

1. Open the filter cover by pressing and pulling the handle

of the filter cover with your finger.

2. Holding the drain cap, pull the drain tube that

is hooked on the guide hook to the front.Do

not pull the drain tube with excessive force.

3. Place a bowl under the washing machine

to catch any remaining water. Then, hold

the drain tube with one hand, and turn the

emergency drain cap counter clockwise with

the other hand to separate it from the drain

tube.

4. Drain the remaining water completely.

5. Pull out the debris cap and debris filter assembly.

6. Wash any dirt or other material from the

debris filter. Make sure the drain pump

propeller behind the debris filter is not

blocked.

7. When you have finished cleaning the filter, insert the debris

cap and filter assembly back into the washer. Turn the

debris filter cap clockwise until the indicator on the debris

filter cap is in the 12 o'clock position, pointing to the

indicator on the washer.

8. Re-attach the emergency drain cap to the drain tube, and

then hook the tube to the hook guide.

9. Re-install the filter cover the filter cover.

WF433BGJ-03159C-02_EN_20120829.indd Sec4:33

Filter cover

Step 1

Step 2

Drain cap

Debris filter cap

Debris filter

cap

maintaining your washer _33

2012-08-31

12:35:32