Franke FMA 605 WH FRK Mode D'emploi Et Installation page 9

ELECTRICAL CONNECTION
• Connect the hood to the mains through a
two-pole switch having a contact gap of at
least 3 mm.
• Remove the grease filters (see paragraph
Maintenance) being sure that the connector
of the feeding cable is correctly inserted in
the socket placed on the side of the fan.
Fixing of the chimney
• In case the corner fixing piece for the chim-
ney 19 has been removed fix it to the hood
casing with 6 screws 12c.
Upper chimney
• Extend slightly the side parts of the chim-
ney, Lock them behind the brackets 7.2.1
and close them.
• Fix the chimney laterally to the brackets
with 4 screws 12d (2,9 x 9,5) supplied.
Lower chimney
• Extend slightly the side parts of the chim-
ney. Lock them between the upper chimney
and the wall, and close them again.
• Fix the chimney laterally to the corner fix-
ing piece for the chimney 19, with 2 screws
12c (2,9 x 6,5) supplied.
EN
9
9