Franke FMA 605 WH FRK Mode D'emploi Et Installation page 11

MAINTENANCE
• Open the Panel by pulling it.
• The panel can be locked in any position.
• Clean the outside with a damp cloth and neutral detergent.
• Clean the inside using a damp cloth and neutral detergent;
do not use wet cloths or sponges, or jets of water; do not
use abrasive substances.
CLEANING METAL SELF- SUPPORTING GREASE FILTERS
• The filters must be cleaned every 2 months of operation, or
more frequently for particularly heavy usage, and can be
washed in a dishwasher.
• Pull the comfort panels to open them.
• Remove the filters one by one pushing them towards the
back side of the hood unit and simultaneously pulling
downwards.
• Any kind of bending of the filters has to be avoided when
washing them. Before fitting them again into the hood
make sure that they are completely dry. (The colour of the
filter surface may change throughout the time but this has
no influence to the filter efficiency).
• When fitting the filters into the hood pay attention that they
are mounted in correct position the handle facing outwards.
• Close the comfort panel.
EN
Opening Panel
Grease filters
1
11