Hand Guard - Husqvarna 136LiHD50 Manuel D'utilisation

• Press the power trigger forward to release the power
trigger.
1
• Then press the power trigger up to apply full power.
2
Release the power trigger and check thereby the free
back movement of the power trigger. The cutting unit must
stop within 1 second.
Restart the machine and release the power trigger
lockout on the front handle. Check that the power trigger
lockout returns to its original position when you release it.
The cutting unit must stop within 1 second.

Hand guard

Li-ion Li-ion
The hand guard prevents hands from coming into contact
with the moving blades, for example, if the operator loses
grip on the front handle.
Check that the hand guard is fitted correctly. Check that
the hand guard is undamaged.
12 – English
GENERAL SAFETY PRECAUTIONS
Blade and blade guard
Li-ion Li-ion
The outer part of the blades (1) are shaped as blade
guards.
Check that the blade guard is not damaged or distorted.
Replace the cutting unit if it is bent or damaged.
IMPORTANT! Save all warnings and
!
instructions for future reference. Save all
warnings and instructions for future
reference. The term "power tool" in the
warnings refers to your mains-operated
(corded) power tool or battery-operated
(cordless) power tool.