Publicité
Les langues disponibles
Les langues disponibles
Connect to power
1. Before operation, please make sure that the voltage mentioned on the power supply is same as the voltage
of your local area.
2. Connect the cord of the power adapter to the "DC IN" jack of the radio.
3. Connect the plug of the power adapter to a wall socket.
The radio is powered and in standby mode when you see the display is switched on.
Turning on or off
1. Press „ON/OFF" (1) in standby mode to turn the radio on.
2. Press „ON/OFF" (1) when the radio is turned on to switch it to standby mode. The time and date show on the
display in standby mode.
To completely disconnect the radio from power, remove the plug of the power adapter from the wall socket.
Setting the clock
The date and time of the radio is automatically set once it receives radio broadcast signals (and when such info is
available). You may also set the date and time through the setting menu. To do so:
1. Press "ON/OFF" (1) to turn the radio on.
2. Press „MENU" (3) once.
3. Rotate "SELECT" (12) until you see "System" on the display and then press "SELECT" (12).
4. Rotate "SELECT" (12) until you see "Time" on the display and then press "SELECT" (12).
5. Rotate "SELECT" (12)until you see "Set Time/Date" on the display and then press "SELECT" (12).
6. Rotate "SELECT" (12) to set hour time and then press "SELECT" (12) to confirm.
7. Repeat step 6 to continue setting minute time, date, month and year.
For more date and time settings, see chapter "Time".
GETTING STARTED
2
UR190 / English Instruction Manual
Publicité
