Insert The Batteries - TFA Dostmann 35.1143.IT Mode D'emploi

TFA_No. 35.1143_Anleitung 28.11.2016 18:18 Uhr
CONNECT - Wireless weather station
Thank you for choosing this instrument from TFA.
1. Before you use this product
• Please make sure you read the instruction manual carefully.
This information will help you to familiarize yourself with your new device, to learn all of its functions and parts, to find out important details
about its first use and how to operate it and to get advice in the event of a malfunction.
• Following and respecting the instructions in your manual will prevent damage to your instrument and loss of your statutory rights arising
from defects due to incorrect use.
• We shall not be liable for any damage occurring as a result of non following of these instructions.
• Likewise, we take no responsibility for any incorrect readings or for any consequences resulting from them.
• Please take particular note of the safety advice!
• Please keep this instruction manual safe for future reference.
2. Delivery contents
• Wireless weather station
• Thermo-hygro sensor (cat.-no. 30.3224.02.IT)
• Instruction manual
3. Range of application and all the benefits of your new instrument at a glance
• Outdoor temperature and humidity wireless (868 MHz), distance range up to 100 m (open field)
• Indoor temperature and humidity
• Maximum and minimum temperatures
• Weather forecast with symbols and atmospheric pressure trend
• Bar graph indication of atmospheric pressure for the last 12 hours
• Radio-controlled clock with alarm and date
• With time zone and manual setting option
• Conjunction with WeatherHub-Gateway possible
• Wall mounting or table stand
4. For your safety
• This product is exclusively intended for the range of application described above. It should only be used as described within these instructions.
• Unauthorized repairs, alterations or changes to the product are not permitted.
Caution!
Risk of injury!
• Keep these devices and the batteries out of reach of children.
• Batteries must not be thrown into a fire, short-circuited, taken apart or recharged. Risk of explosion!
• Batteries contain harmful acids. Low batteries should be changed as soon as possible to prevent damage caused by leaking.
• Never use a combination of old and new batteries together, nor batteries of different types. Wear chemical-resistant protective gloves and safety
glasses when handling leaking batteries.
14
Seite 8
CONNECT - Wireless weather station
Important information on product safety!
• Do not expose the devices to extreme temperatures, vibrations or shocks.
• Protect it from moisture.
• The transmitter is splashproof, but not watertight. Should you decide to use the transmitter in the outdoor area, choose a shady and dry place.
5. Elements and buttons
Weather station (Base station)
Display (Fig. 1)
A 1: Indoor temperature A 2: DCF reception symbol
A 3: Day of the week A 4: Time/alarm time/date
A 5: Alarm symbol A 6: Indoor humidity/seconds
A 7: Atmospheric pressure trend A 8: Weather forecast with weather symbols
A 9: Pressure history graph of the last 12 hours A 10: Outdoor temperature
A 11: Maximum/minimum values A 12: Outdoor humidity
A 13: Reception symbol for the outdoor transmitter
Buttons (Fig. 1)
B 1: SET button B 2: + button
B 3: – button B 4: ALARM button
B 5: MIN / MAX button
Housing (Fig. 1+2)
C 1: Wall mounting hole C 2: Buttons
C 3: Battery compartment C 4: Table stand (removable)
Transmitter (Fig. 3)
D 1: Battery compartment
D 2: Support for wall mounting or table stand
6. Getting started

6.1 Insert the batteries

• Place the base station and the transmitter on a table at a distance of about 1.5 meters from each other. Avoid being close to possible sources of
interference such as electronic devices and radio equipment.
• Open the battery compartment of the transmitter.
• Insert two new AA 1,5 V batteries, polarity as illustrated.
• Close the battery compartment carefully.
• Open the base station battery compartment and insert two new C 1.5V batteries. Make sure the polarity is correct. The device will alert you with a
beep and all segments will be displayed for a short moment. Close the battery compartment again.
• The indoor temperature and humidity appear on the base station display.
15