Electrolux EKM3700 Manuel D'instructions page 7

10
Push down the release button for the front attachment hub to the right and remove the attachment hub cov-
er. Fit the power shaft of the attachment in the front attachment hub socket, using the attachment hub release
button. The attachment release button will click into position once the meat grinder is securely attached. Place a
container under the attachment
Caution:
11
Place the food tray over the grinder housing. Cut raw meat into small pieces and place it on the food tray. Plug
in the appliance and turn the speed selector to desired speed (recommended speed: 3-4). Feed the meat into the
feed chute by using the pusher.
Caution:
Note: Meat should not contain bones, muscles or skin.
HOW TO USE THE SLICER/SHREDDER*
12
Choose a cylindrical slicer (medium or course) or a shredder knife. Insert the attachment by turning it clock-
wise into the slicer/shredder housing. Make sure the attachment is fully inserted.
Caution: The blades and inserts are very sharp!
13
Push down the release button for the front attachment hub to the right and remove the attachment hub
cover. Fit the power shaft of the attachment in the front attachment hub socket, using the attachment hub
release button. Assemble the slicer/shredder in the attachment hub. The attachment release button will click
into position once the slicer/shedder is securely attached. Place a container under the attachment.
Cut the food into small pieces. Plug in the appliance and turn the speed selector to desired speed
(recommended speed: 4).
14
Feed the food into the feed chute by using the pusher.
appliance and unplug it. Place the front attachment hub cover using the attachment hub release button.
HOW TO USE THE BLENDER*
15
Remove the rear attachment hub cover by pulling it straight backwards. Place the bottom of the blender on the
three rubber rings. Align the arrows on the blender to the arrows on the main body.
Caution:
16
Rotate the blender clockwise to lock it in position. The blender handle should point towards the back of the
Adjust the speed selector to the desired speed (recommended speed: 6), mix until the right consistency of the
blend is reached.
Caution: Never operate blender without ingredients.
CLEANING AND CARE
17
Unplug the appliance. The wire whip, meat grinder* and slicer/shredder* should only be washed by hand in
warm soapy water.
dishwasher.
Caution! The blades and inserts are very sharp and can cause injury.
Warning!
before use.
18
Cleaning the blender*:
Add a drop of dishwashing soap and one litre of warm water. Fix the blender on the appliance.
Run the machine on speed 6 for half a minute, then pour out the water. Rinse the blender and let it dry.
Caution! The blades and inserts are very sharp and can cause injury.
19
The housing should only be cleaned with a soft damp cloth, then dried with a cloth.
Note: Do not use abrasive cleansers or scouring pads to clean the surfaces of your appliance.
Enjoy your new Electrolux product!
www.electrolux.com
GB
FR
AR
BG
CZ
DE
DK
EE
FA
FI
HR
HU
IT
LT
LV
NO
PL
RO
RS
RU
SE
SI
SK
TR
UA
7