Publicité
Les langues disponibles
Les langues disponibles
5
Set beginning hour
Press the PLAY/K or STOP/L but-
ton until the desired hour appears.
(Example: " 7, PM" for 7:30PM)
Then, press the F.FWD/B button.
6
Set beginning minute
Press the PLAY/K or STOP/L but-
ton until the desired minute
appears. (Example: "30" for
7:30PM)
Then, press the F.FWD/B button.
7
Set end hour
Press the PLAY/K or STOP/L but-
ton until the desired hour appears.
(Example: "8, PM" for 8:50PM)
Then, press the F.FWD/B button.
8
Set end minute
Press the PLAY/K or STOP/L but-
ton until the desired minute
appears. (Example: "50" for
8:50PM)
Then, press the F.FWD/B button.
9
Set the tape speed
Press the PLAY/K or STOP/L but-
ton until the desired tape speed
appears. (Example: SP)
10
Finish setting the program
Press the F.FWD/B or REW/s button. The program
is now completed.
•
To set another program, repeat steps [2] to [10].
•
Press the MENU button on the remote control to
return to original mode.
11
Set the timer
Press the POWER button to set automatic timer
recording. The TIMER REC indicator lights up.
•
You must turn off the TV/VCR to activate auto-
matic timer recording.
If power is not turned off and you continue watch-
ing TV, "TIMER REC STANDBY" starts flashing
on the TV screen 2 minutes before the programmed
start time.
TIMER PROGRAM EXTENSION
– TIMER PROGRAMMING –
CH DATE
BEGIN END
To shift the time schedule of an automatic timer
- -
-/- - - - -
-:- -
-:- - - -
- -
-/- - - - -
-:- -
-:- - - -
- -
-/- - - - -
-:- -
-:- - - -
recording.
P
B 61 7/06 FRI
7:12
-:- - - -
M
- -
-/- - - - -
-:- -
-:- - - -
- -
-/- - - - -
-:- -
-:- - - -
1)Press the POWER button.
- -
-/- - - - -
-:- -
-:- - - -
- -
-/- - - - -
-:- -
-:- - - -
2)Repeat step [1] on page 26.
3)Press the RECORD button and select the desired
program using the PLAY/K or STOP/L button.
– TIMER PROGRAMMING –
CH DATE
BEGIN END
4)Press the RECORD button again.
- -
-/- - - - -
-:- -
-:- - - -
- -
-/- - - - -
-:- -
-:- - - -
Each additional push will shift forward the
- -
-/- - - - -
-:- -
-:- - - -
P
B 61 7/06 FRI
7:30
-:- - - -
M
- -
-/- - - - -
-:- -
-:- - - -
begin/end time for recording by 10 minutes. When
- -
-/- - - - -
-:- -
-:- - - -
- -
-/- - - - -
-:- -
-:- - - -
- -
-/- - - - -
-:- -
-:- - - -
the recording is already in progress, each additional
push will shift forward the end time only. If you
want to cancel while setting, press the
– TIMER PROGRAMMING –
PAUSE/STILL button on the remote control. The
CH DATE
BEGIN END
recording time returns to the original time.
- -
-/- - - - -
-:- -
-:- - - -
- -
-/- - - - -
-:- -
-:- - - -
- -
-/- - - - -
-:- -
-:- - - -
NOTE: When you shift forward the time schedule
P
P
B 61 7/06 FRI 7:30
8:30
- -
M
M
- -
-/- - - - -
-:- -
-:- - - -
- -
-/- - - - -
-:- -
-:- - - -
during recording, the recording speed will automati-
- -
-/- - - - -
-:- -
-:- - - -
- -
-/- - - - -
-:- -
-:- - - -
cally be set to the SLP mode.
5)Press the F.FWD/B or REW/s button to exit the
setting menu. Then press the MENU button on the
– TIMER PROGRAMMING –
CH DATE
BEGIN END
remote control to return to original mode.
- -
-/- - - - -
-:- -
-:- - - -
- -
-/- - - - -
-:- -
-:- - - -
- -
-/- - - - -
-:- -
-:- - - -
P
P
B 61 7/06 FRI 7:30
8:50
- -
M
M
- -
-/- - - - -
-:- -
-:- - - -
TO CORRECT A PROGRAM
- -
-/- - - - -
-:- -
-:- - - -
- -
-/- - - - -
-:- -
-:- - - -
- -
-/- - - - -
-:- -
-:- - - -
•
While setting a program; press the REW/s but-
ton to go back one step and enter the correct num-
bers using the PLAY/K or STOP/L button.
– TIMER PROGRAMMING –
CH DATE
BEGIN END
•
After setting a program;
- -
-/- - - - -
-:- -
-:- - - -
- -
-/- - - - -
-:- -
-:- - - -
1)Press the POWER button.
- -
-/- - - - -
-:- -
-:- - - -
P
P
B 61 7/06 FRI 7:30
8:50
SP
M
M
- -
-/- - - - -
-:- -
-:- - - -
2)Repeat steps [1] - [2] on page 26.
- -
-/- - - - -
-:- -
-:- - - -
- -
-/- - - - -
-:- -
-:- - - -
- -
-/- - - - -
-:- -
-:- - - -
3)Press the F.FWD/B button (or press the REW/s
4)Press the POWER button to set automatic timer
TO CANCEL AN AUTOMATIC TIMER
RECORDING
•
After setting a program;
1)Press the POWER button.
2)Repeat steps [1] ~ [2] on page 26 and select a
3)Press the T-PROG. CLEAR button.
4)Press the MENU button on the remote control to
•
While recording is in progress;
1)Press POWER button.
2)Press the STOP/EJECT button on the TV/VCR.
- 27 -
button to go back one step) until the part you
want to correct begins flashing, then make the
changes pressing the PLAY/K or STOP/L but-
ton.
recording.
program you want to cancel.
return to TV mode.
EN
0B19
Publicité
