Publicité
Les langues disponibles
Les langues disponibles
Make sure ...
•
TV/VCR power must be turned on.
•
Insert a prerecorded tape.
•
Before playback, follow steps below.
RENTAL PLAYBACK
This function enables you to improve the picture
quality when playing back worn cassettes such as
rented tapes.
1
Select "USER'S SET UP"
Press the MENU button on the
remote control.
Press the PLAY/K or STOP/L but-
ton to point to "USER'S SET UP".
Then, press the F.FWD/B button.
2
Set "RENTAL" to [ON]
Press the PLAY/K or STOP/L but-
ton to point to "RENTAL".
Press the F.FWD/B or REW/s
button until [ON] appears.
3
Exit the Rental setting
Press the MENU button on the remote control to
return to the TV mode.
4
Start playback
Press the PLAY button to start playback. "RENTAL
PLAY B" appears.
•
Once you select the Rental mode, it stays in effect
even after you turn off the TV/VCR.
TO CANCEL THE RENTAL MODE
Repeat steps [1] and [2], select [OFF] using the
F.FWD/B or REW/s button on the remote control.
Press the MENU button on the remote control to
return to TV mode.
If there is a power failure of any kind, the unit
will retain its memory for this feature.
SPECIAL PLAYBACK
The TV/VCR has the auto repeat function that allows
you to repeat a tape indefinitely without touching the
PLAY button.
ALL REPEAT:
BLANK REPEAT
1
Press the MENU button on the
– M E N U –
TIMER PROGRAMMING
remote control.
PICTURE CONTROL
SETTING CLOCK
CHANNEL SET UP
Press the PLAY/K or STOP/L but-
B USER'S SET UP
V-CHIP SET UP
LANGUAGE [ENGLISH]
ton to point to "USER'S SET UP".
CAPTION [OFF]
ZERO RETURN
TIME SEARCH
Then, press the F.FWD/B button.
2
– USER'S SET UP –
Press the PLAY/K or STOP/L but-
B RENTAL
[ON]
ton to point to "REPEAT PLAY".
REPEAT PLAY
[OFF]
AUTO RETURN
[OFF]
Press the F.FWD/B or REW/s
button repeatedly until your desired
selection [ALL] or [BLANK]
appears.
3
Press the MENU button on the remote control to
return to the TV mode.
4
Press the PLAY button to start the Repeat Play.
"REPEAT PLAY B" appears.
•
Once you select the Repeat Play mode, it stays in
effect even after you turn off the TV/VCR.
•
If the Rental mode is set [ON], the "RENTAL
PLAY B" display has priority.
TO CANCEL THE REPEAT PLAY MODE
Repeat steps [1] and [2], select [OFF] using the
F.FWD/B or REW/s button on the remote control.
Press the MENU button on the remote control to
return to TV mode.
If there is a power failure of any kind, the unit
will retain its memory for this feature.
- 22 -
AUTO REPEAT PLAYBACK
Repeat playback from the beginning
to the end of the tape.
: Repeat playback from the begin-
ning to a blank part, which is blank for more than
10 seconds.
Select "USER'S SET UP"
Select "ALL" or "BLANK"
Exit the Repeat Play setting
Start playback
– M E N U –
TIMER PROGRAMMING
PICTURE CONTROL
SETTING CLOCK
CHANNEL SET UP
B USER'S SET UP
V-CHIP SET UP
LANGUAGE [ENGLISH]
CAPTION [OFF]
ZERO RETURN
TIME SEARCH
– USER'S SET UP –
RENTAL
[OFF]
B REPEAT PLAY
[ALL]
AUTO RETURN
[OFF]
EN
0B19
Publicité
