AUTOMATIC TIMER
RECORDING
You may set the TV/VCR to start and end a record-
ing while you are away. You can set 8 programs to
record on specific days, daily or weekly within a 1
year period.
In the example below, the timer is being set to record:
DATE:
July 6th, 2001
SETTING TIME: from 7:30PM to 8:50PM
CHANNEL:
CH61
TAPE SPEED:
SP
Make sure ...
•
If a cable box or satellite box is connected with the
TV/VCR you will be limited to record only one
channel. And the channel selector on the TV/VCR
must be selected to the output channel of the boxes
CH 3 or CH 4 and then the actual channel to be
recorded must be selected on the boxes.
•
Clock must be set to the correct time and date
before setting the timer.
•
TV/VCR power must be turn on to program it.
•
Insert a cassette tape with its erase prevention tab
in place. (If necessary, rewind or fast forward the
tape to the point at which you want to begin
recording.)
•
The channel you want to record is properly set in
advance. (See page 13.)
Avoid over lap of programs ...
There is a chance that a program will not be record-
ed. when programs overlap;
•
The program with an earlier start has priority.
•
Once the earliest program finishes, the overlapping
programs will begin recording in sequence.
•
The illustration below demonstrates the sequence
of recordings.
Program 1
10:00AM - 11:00AM
Program 2
9:00AM - 10:00AM
Program 3
9:30AM - 12:00PM
Program 1
10:00AM-11:00AM
Program 2
9:00AM-10:00AM
Program 3
9:30AM-12:00PM
9:00AM
*Recording period is SHADED
1
Select "TIMER PROGRAMMING"
Press the MENU button on the remote control.
Confirm "TIMER PROGRAMMING" is pointed by
pressing the PLAY/K button.
And press the F.FWD/B button.
TIMER
Recording Sequence
10:00AM
11:00AM
12:00PM
•
If you have not yet set the clock,
"MANUAL CLOCK SET"
appears. If so, follow stops [3] to
[8] on page 15. Then set the timer
recording.
2
Select your desired program position (1~8)
Press the PLAY/K or STOP/L but-
ton to select the desired program
position.
Then, press the F.FWD/B button.
3
Set the channel number
Press the PLAY/K or STOP/L but-
ton until the desired channel num-
ber appears.
(Example: CH61)
Then, press the F.FWD/B button.
Remember: If the TV/VCR is connected to a cable
box or satellite box, the TV/VCR must be on CH3 or
CH4, then the channel to be recorded is selected on
the cable box or satellite box.
4
Select once, every day or weekly recording
For once recording :
Press the PLAY/K (up) button
until the desired date appears.
(Example: "7/06" for July 6th).
Then, press the F.FWD/B but-
ton.
For every day recording : To record a TV program
at the same time on the same channel every day.
(Example: Monday through
Sunday)
Press the STOP/L (down) button
until "EVRY DAY" appears.
Then, press the F.FWD/B but-
ton.
For weekly recording : To record a
TV program at the same time on the
same channel every week.
(Example: every Monday)
Press the STOP/L (down) button
until "EVRY" and your desired day of the week
appear together. Then, press the F.FWD/B button.
- 26 -
– M E N U –
B TIMER PROGRAMMING
PICTURE CONTROL
SETTING CLOCK
CHANNEL SET UP
USER'S SET UP
V-CHIP SET UP
LANGUAGE [ENGLISH]
CAPTION [OFF]
ZERO RETURN
TIME SEARCH
– TIMER PROGRAMMING –
CH DATE
BEGIN END
- -
-/- - - - - -:- -
-:- - - -
- -
-/- - - - - -:- -
-:- - - -
- -
-/- - - - - -:- -
-:- - - -
B - -
-/- - - - - -:- -
-:- - - -
- -
-/- - - - - -:- -
-:- - - -
- -
-/- - - - - -:- -
-:- - - -
- -
-/- - - - - -:- -
-:- - - -
- -
-/- - - - - -:- -
-:- - - -
– TIMER PROGRAMMING –
CH DATE
BEGIN END
- -
-/- - - - - -:- -
-:- - - -
- -
-/- - - - - -:- -
-:- - - -
- -
-/- - - - - -:- -
-:- - - -
B 61
-/- - - - - -:- -
-:- - - -
- -
-/- - - - - -:- -
-:- - - -
- -
-/- - - - - -:- -
-:- - - -
- -
-/- - - - - -:- -
-:- - - -
- -
-/- - - - - -:- -
-:- - - -
– TIMER PROGRAMMING –
CH DATE
BEGIN END
- -
-/- - - - - -:- -
-:- - - -
- -
-/- - - - - -:- -
-:- - - -
- -
-/- - - - - -:- -
-:- - - -
B 61 7/06 FRI
-:- -
-:- - - -
- - -/- -
- - - -:- -
-:- - - -
- -
-/- - - - - -:- -
-:- - - -
- -
-/- - - - - -:- -
-:- - - -
- -
-/- - - - - -:- -
-:- - - -
– TIMER PROGRAMMING –
CH DATE
BEGIN END
- -
-/- - - - - -:- -
-:- - - -
- -
-/- - - - - -:- -
-:- - - -
- -
-/- - - - - -:- -
-:- - - -
B 61 EVRY DAY -:- -
-:- - - -
- - -/- -
- - - -:- -
-:- - - -
- -
-/- - - - - -:- -
-:- - - -
- -
-/- - - - - -:- -
-:- - - -
- -
-/- - - - - -:- -
-:- - - -
– TIMER PROGRAMMING –
CH DATE
BEGIN END
- -
-/- - - - - -:- -
-:- - - -
- -
-/- - - - - -:- -
-:- - - -
- -
-/- - - - - -:- -
-:- - - -
B 61 EVRY MON -:- -
-:- - - -
- - -/- -
- - - -:- -
-:- - - -
- -
-/- - - - - -:- -
-:- - - -
- -
-/- - - - - -:- -
-:- - - -
- -
-/- - - - - -:- -
-:- - - -
EN
0B19