Emerson EC313D Manuel Du Propriétaire page 13

CHANNEL SET UP AGAIN
Make sure ...
•
Press the POWER button to turn on the TV/VCR.
1
Select "CHANNEL SET UP"
Press the MENU button on the
remote control.
Press the PLAY/K or STOP/L but-
ton to point to "CHANNEL SET
UP".
Then, press the F.FWD/B button.
2
Begin auto preset
Press the PLAY/K or STOP/L but-
ton to point to "AUTO PRESET".
Then, press the F.FWD/B button.
The tuner scans and memorizes all the active chan-
nels in your area.
3
After scanning
The tuner stops on the lowest memorized channel.
SELECTING THE LANGUAGE
Make sure ...
•
Press the POWER button to turn on the TV/VCR.
NOTE: This function effects only the language on
the screen menu and not the audio source.
1
Select "LANGUAGE"
Press the MENU button on the
remote control.
Press the PLAY/K or STOP/L but-
ton to point to "LANGUAGE".
2
Select "ENGLISH" or "FRANÇAIS"
Select "ENGLISH" or "FRANÇAIS"= French using
the F.FWD/B or REW/s button.
3
Exit the Language mode
Press the MENU button on the remote control to
return to TV mode.
NOTE: If for some reason the menu is in French,
press the MENU button on the remote control, press
the PLAY/K button to point to "LANGAGE
[FRANÇAIS]", then press the F.FWD/B button, then
press the MENU button on the remote control.
– M E N U –
TIMER PROGRAMMING
Select this feature and the TV/VCR's clock automati-
PICTURE CONTROL
SETTING CLOCK
B CHANNEL SET UP
cally will advance one hour in April, then reverse one
USER'S SET UP
V-CHIP SET UP
hour in October.
LANGUAGE [ENGLISH]
CAPTION [OFF]
ZERO RETURN
When Daylight-Saving Time is ON, the clock will
TIME SEARCH
change automatically as follows:
•
First Sunday of April :
– CHANNEL SET UP –
diately changes to 3 AM. Any timer programming
ADD / DELETE CH (TV)
you have set to occur between 2 AM and 3 AM
B AUTO PRESET
will not record.
•
Last Sunday of October :
immediately changes to 1 AM.
Make sure ...
•
Press the POWER button to turn on the TV/VCR.
1
Press the MENU button on the
remote control.
Press the PLAY/K or STOP/L but-
ton to point to "SETTING
CLOCK".
Then, press the F.FWD/B button.
2
Time) to [ON]
– M E N U –
Press the PLAY/K or STOP/L but-
TIMER PROGRAMMING
PICTURE CONTROL
SETTING CLOCK
ton to point to "D.S.T.".
CHANNEL SET UP
USER'S SET UP
V-CHIP SET UP
Then, press the F.FWD/B or
B LANGUAGE [ENGLISH]
CAPTION [OFF]
ZERO RETURN
REW/s button until [ON] appears.
TIME SEARCH
3
Press the MENU button on the remote control to
return to TV mode.
TO CANCEL THE DAYLIGHT-SAVING
TIME
Repeat steps [1] to [2], select [OFF] using the
F.FWD/B or REW/s button. then, press the MENU
button on the remote control to return to TV mode.
- 13 -
DAYLIGHT-SAVING TIME
At 2 AM the clock imme-
Select "SETTING CLOCK"
Set "D.S.T." (Daylight-Saving
Exit the Daylight-Saving Time mode
At 2 AM the clock
– M E N U –
TIMER PROGRAMMING
PICTURE CONTROL
B SETTING CLOCK
CHANNEL SET UP
USER'S SET UP
V-CHIP SET UP
LANGUAGE [ENGLISH]
CAPTION [OFF]
ZERO RETURN
TIME SEARCH
– SETTING CLOCK –
AUTO CLOCK [ON]
AUTO CLOCK CH [AUTO]
MANUAL CLOCK SET
B D.S.T. [ON]
EN
0B19