Tools Needed - Rubi DT180EVO Manuel D'utilisation

FEATURES
KNOW YOUR TILE SAW
See Figure 3.
The safe use of this product requires an understanding of
the information on the tool and in this operator's manual as
well as a knowledge of the project you are attempting. Before
use of this product, familiarize yourself with all operating
features and safety rules.
7 in. TILE CUTTING WHEEL — A 7 in. tile cutting wheel is
included with your saw.
WARNING:
Do not use cutting wheels rated less than the
speed of this tool. Failure to heed this warning
could result in personal injury.

TOOLS NEEDED

The following tools (not included or drawn to scale) are needed for assembly and alignment:
PHILLIPS SCREWDRIVER
FRAMING SQUARE
FLATHEAD SCREWDRIVER
C-CLAMP
MITER GUIDE — The easy-to-read indicator on the miter
guide shows the exact angle for the desired cut.
MOTOR — This machine has a strong motor with sufficient
power to handle tough cutting jobs.
ON/OFF SWITCH — This saw has an easy access on/off
switch.
SLIDING TABLE — The sliding table allows the user to slide
the workpiece into the cutting wheel for accurate cuts.
SPLASH GUARD — The splash guard helps contain over-
spray and mist.
SUBMERSIBLE PUMP — The submersible pump provide
water to the cutting wheel.
UPPER WHEEL GUARD — Protects user from wheel con-
tact on upper portion of wheel.
10 — English
10 mm, 14 mm WRENCH
COMBINATION SQUARE
Fig. 4