Velleman PROMIX100 Mode D'emploi page 2

1. POWER switch
2. OUTPUT DISPLAY
3. MONITOR switch
4. Monitor LEVEL control
5. Headphone jack
6. Volume control for LINE 4
7 Volume control for LINE 3
8. Input selector for PHONO 2 or LINE 2
9. Input selector for PHONO 1 or LINE1
10. Volume control for PHONO 2 or LINE 2
11. Volume control for PHONO 1or LINE 1
12. Volume control for MIKE 2 and MIKE 4
13. Volume control for MIKE 1 and MIKE 3
14. 6.3mm jack for MIKE 1
15. 6.3mm jack for MIKE 2
4. Rear Panel and its Controls
16. Power supply cable
17. Record output jacks L/R REC
18. Main output jacks L/R AMP
19. Input jacks L/R LINE 4
20. Input jacks L/R LINE 3
21. Input jacks L/R PHONO 2 or LINE 2
22. Input jacks L/R PHONO 1 or LINE 1
23. 6.3mm jack for MIKE 4
24. 6.3mm jack for MIKE 3
25. Earth terminal screw: counters humming sounds.
5. Connections
All connections have to be made correctly in order for the device to work properly.
1. If you wish to turn the apparatus off, simply put the "POWER" switch (1) in the "off" position. All connections must
be established when the apparatus is off. In other words, make sure that all linear controls (4, 6, 7, 10-13) are at
zero.
2. Insert the supply cable plug (20) into the current socket.
3. All necessary inputs are connected to cinch plugs through shielded cables. The output jacks are connected to a
stereo unit, also through shielded cables.
4. Microphones: up to 4 microphones can be connected to this mixer through the 6.35mm plugs (14, 15, 26, 28).
Please use a suitable adapter if your microphones are equipped with a different type of plug.
5. Compact disc players, cassette recorders, video recorders, tape recorders and other high level audio signal
sources as well as amplifiers should be connected to the cinch sockets (23, 24).
6. A record player with a magnetic pick-up can be connected to the cinch sockets (25, 26).
PROMIX100
(fig. 2)
16 17 18 19 20 21 22 23
2
24 25
VELLEMAN