Pioneer MEH-P7300R Manuel D'installation page 5

The pin position of the ISO connector will differ
depends on the type of vehicle. Connect 6* and
7* when Pin 5 is an antenna control type. In
another type of vehicle, never connect 6* and 7*.
Blue/white
To system control terminal of the power
amp (max. 300 mA 12 V DC).
Blue/white (6*)
+
Front speaker
≠
+
Rear speaker
≠
Left
+
Subwoofer
≠
Speaker leads
White : Front left +
White/black : Front left ≠
: Front right +
Gray
Gray/black : Front right ≠
Green : Rear left + or Subwoofer +
Green/black : Rear left ≠ or Subwoofer ≠
Violet : Rear right + or Subwoofer +
: Rear right ≠ or Subwoofer ≠
Violet/black
Connecting cords
with RCA pin plugs
(sold separately)
System remote control
Blue/white (7*)
To Auto-antenna relay control terminal
(max. 300 mA 12 V DC).
+
≠
+
≠
+
≠
Use this for connections when you have the separately
available amplifier.
Note:
Change the Initial Setting of this Product (refer to the
Operation Manual). The subwoofer output of this unit is
monaural.
Power amp
(sold separately)
Power amp
(sold separately)
Power amp
(sold separately)
Front speaker
Rear speaker
Right
Subwoofer
Fig. 2
4