Publicité
Les langues disponibles
Les langues disponibles
7. Install the main filter into the micro filter. Make sure that the markers are aligned.
8. Install the main filter into the sieve.
9. Turn the main filter clockwise to fasten it.
Caution:
Make sure that the filters are placed correctly. Incorrect placement of the filters affects the maximum
performance of the appliance.
CLEANING THE SPRAY ARMS
1. Remove the upper and lower basket.
2. Remove the nut (A).
3. Remove the upper spray arm (B).
4. Pull the lower spray arm (C) upwards to remove it.
5. Clean the spray arms. Use warm water.
6. Install the lower spray arm (C).
7. Install the upper spray arm (B).
8. Tighten the nut (A).
7
Extra information
LED INDICATOR
LED indicator
Red, continuous
Red, flashing
Red, flashing rapidly
Green, continuous
Note:
The LED indicator does not operate when the door of the appliance is opened.
WATER HARDNESS LEVEL SETTINGS (SALT CONSUMPTION)
Level
German hardness
[dH]
1
0-5
2
6-11
3
12-17
4
18-22
5
23-31
6
32-50
State of the appliance
The appliance is running a program.
A program is cancelled.
The appliance has an error. Refer to section
codes'
.
A program is finished.
French hardness
British hardness [dE]
[dF]
0-9
0-6
10-20
7-14
21-30
15-21
31-40
22-28
41-55
29-39
56-90
40-63
(Figure 21)
(Figure 22)
(Figure 23)
'Fault
Display indicator
L1
L2
L3
L4
L5
L6
English
•
49
Publicité
