Inventum IVW6040A Manuel D'utilisation page 43

Icon Name
P8 - Auto basic
P9 - Auto intensive
Note:
For the auto delicate, auto basic and auto intensive programs, the appliance automatically adjusts the
washing time, the temperature and the amount of water based on the soil level of the dishes.
5 Operation
PREPARING FOR OPERATION
1. Do a check if the electricity and the water supply connections of the appliance match the values indicated in the
installation instructions.
2. Remove all packaging material inside the appliance.
3. Fill the salt reservoir. Refer to section
4. Fill the rinse aid reservoir. Refer to section
FILLING THE SALT RESERVOIR
For a good result the appliance needs soft (less calcareous) water. Salt is used to soften the water and it prevents
white lime residues on your dishes and the interior of the appliance.
Caution:
Only use salt that is suitable for a dishwasher. Do not use table salt.
Note:
Fill the salt reservoir when the salt indicator on the control panel is on.
1. Remove the lower basket.
2. Turn the cap (A) of the salt reservoir counter-clockwise to remove it.
3. Fill the salt reservoir with water.
Note:
You only have to fill the salt reservoir with water before first use of the appliance.
4. Put a funnel in the opening of the salt reservoir.
5. Fill the reservoir with salt until the overflow level.
6. Install the cap of the salt reservoir.
Caution:
Remove any spilled salt immediately and run a full program to prevent corrosion of the appliance.
Description
Auto program for normally soiled dishes.
Auto program for heavily soiled dishes.
'Filling the salt reservoir'
.
'Filling the rinse aid reservoir'
.
English
Time
[min.]
100-122
111-179
(Figure 3)
(Figure 4)
(Figure 5)
• 43